วิธีการและขั้นตอนการเข้าหัวสาย RJ-45
(How To Access The Ethernet Header)
วิธีการเข้าหัวสาย RJ - 45
อุปกรณ์1. สายแลน (Cat5e) 2. คีมเข้าหัว RJ 45
3. หัวสายแลน RJ 45 4. อุปกรณ์วัดสัญญาณ
How to access the Ethernet header
Equipment1. Cable 2. Pliers Head RJ
3. Heads Ethernet RJ 45 4. Device measurements
ขั้นตอนการเข้าหัวสายแลน
1. ปลอกเปลือกนอกของสาย CAT5 ออก โดยห่างจากปลายสายประมาณ 2-3 cm โดยคีมเข้าหัวบางรุ่นจะมีส่วนที่ปลอกเปลือกนอกของสาย RJ45 พอใส่สายแลนเข้าไปแล้วหมุนคีมเป็นวงกลมให้รอบสาย หากคีมเข้าหัวไม่มีในส่วนนี้ ให้ใช้คัตเตอร์หรือกรรไกรแทนตามความถนัด ระวังอย่าให้สายแลนภายในขาด
The cable head.
1. Outer casing of the CAT5 cable from the line out by about 2-3 cm.The pliers head cut some of the outer sheath of the cable into the RJ45 port.Pliers and turn in around the line. If tweezers are not available in this head.Thecutter.Replaced by aptitude or scissors. Do not let the lack of LAN.
ประกอบคำอธิบายข้อ 1.
2. จากนั้นก็ดึงส่วนของปลอกที่แยกออกจากกันออก
2. Then pull the casing separated out
ประกอบคำอธิบายข้อ 2.
3. เมื่อปลอกสายแลนเสร็จแล้ว จะสังเกตเห็นมีเส้นด้ายสีขาว(แล้วแต่ยี่ห้อของสายแลน) ให้ใช้กรรไกร ตัดตัดสายไฟสายแลน
3. Finished cable sheath. I noticed the white yarn. (Depending on the brand of cable), use scissors to cut the power cable.
ประกอบคำอธิบายข้อ 3.
4. จากนั้นคลายเกียวออกมาจะพบสายแลนพันเกลียวเป็นคู่อยู่ 4 คู่
4. Cable in a double strand cable is 4 pairs.
ประกอบคำอธิบายข้อ 4.
5. จัดเลียงลำดับสายใหม่ (ในกรณีต้องการทำสายตรง ใช้สำหรับเครื่องคอมไป Switch) โดยให้เรียงสีดังนี้ทั้งสองข้าง ขาวส้ม ส้ม ขาวเขียว ฟ้า ขาวฟ้า เขียว ขาวน้ำตาล น้ำตาล
** ในกรณีต้องการทำสายครอส (สำหรับต่อคอมกับคอม) ให้เรียงตามนี้
ข้างหนึ่งเป็น ขาวเขียว – ส้ม - ขาวส้ม -ฟ้า – ขาวฟ้า – เขียว – ขาวน้ำตาล – น้ำตาลและอีกข้างหนึ่งเป็นขาวส้ม –เขียว – ขาวเขียว - ฟ้า - ขาวฟ้า - ส้ม - ขาวน้ำตาล – น้ำตาล
5. A new line escape sequences. (In case you want to code. For PC to Switch) by the color orange, orange and white are both white - blue - green - white - blue - green - brown and white - brown
** If you do cross the line. (For connecting to a computer) are by this.
One is white and green - orange - white and orange - blue - white and blue – green white and brown – brown And the other is white and orange - green – white and green blue white and blue - orange - white and brown - brown.
ประกอบคำอธิบายข้อ 5.
6. จากนั้นเรียงสายแลนตามสีให้ถูกต้อง (ตามประเภทการใช้งาน) แล้วใช้กรรไกรตัดให้สายแลนมีขนาดเท่ากัน
6. Then sort by color cable correctly. (Based on usage) and then use scissors to cut the cable ot the same size
ประกอบคำอธิบายข้อ 6.
7. จากนั้นสอดสายแลนเข้าหัว RJ 45 ให้สุดปลอก
7. Then insert the cable into the RJ 45 on the sleeve.
ประกอบคำอธิบายข้อ 7.
8. จากนั้นนำสายแลนที่เข้าหัว RJ 45 แล้ว นำมาเข้าคีม แล้วกดให้มิด (หากไม่แน่ใจให้กดย้ำอีกครั้ง)
8. Then RJ 45 cable that is then used pliers to press the Midnighter.(If not sure, press again)
ประกอบคำอธิบายข้อ 8.
9. หลังจากที่เราเข้าหัว RJ 45 กับสายแลนเสร็จแล้ว ให้นำมาทดสอบกับอุปกรณ์วัดสัญญาณสังเกตสัญญาณไฟ ถ้าต่อแบบตรงสัญญาณไฟจะตรงกันทั้งหมด 8 ช่อง หากสัญญาณไฟช่องใดสลับกันแสดงว่ามีหัว RJ 45 ด้านใดด้านหนึ่งเข้าหัวผิด (สลับสาย) ต้องตัดหัว RJ 45 ที่เข้าหัวผิด แล้วทำการเข้าหัว RJ 45 ใหม่
9. After which we head to the RJ 45 Ethernet finished. The devices were tested with the observed signal lights. If the exact same signal to all 8 channels or switch the lights on the RJ 45 shows that there is one side of the head (switch) must cut off the head to head against the RJ 45. Then head into the new RJ 45.
ประกอบคำอธิบายข้อ 9.
ไม่มีความคิดเห็น:
แสดงความคิดเห็น